inserts

for plastics, light alloys and wood

IE • Expansion Insert

  • Straightforward and quick manual installation
  • Very sharp teeth for improved penetration of material
  • Low cost
  • Locking improves torque resistance and holding force

C Type : short with a locking ring

  Plastics Wood or Fibreboard
Stainless steel contact us
Brass
                          mecanical properties
                          LEXAN ABS
Reference   Thread M
(6H)
  L   Ø E   Ø A   Ø B   Well Ø
  Torque
Nm
Hold.Force
daN
Torque
Nm
Hold.Force
daN
ie c 020 035 t039 l 0   m2 x 0.40   3.5   3.90   3.50   3.10   3.10   < 0.30 77 < 0.30 -
ie c 025 040 t044 l 0   M2.5 X 0.45   4   4.40   4.00   3.50   3.60 to 3.70   0.45 63 0.35 46
ie c 030 050 t056 l 0   m3 x 0.50   5   5.60   5.00   4.50   4.60 to 4.70   0.60 68 0.60 48
ie c 035 050 t059 l 0   M3.5 x 0.60   5   5.90   5.50   4.90   5.00 to 5.20   - - - -
ie c 040 050 t066 l 0   m4 x 0.70   5   6.60   6.00   5.40   5.50 à 5.70   1.00 97 0.80 75
ie c 050 060 t076 l 0   M5 x 0.80   6   7.60   7.00   6.50   6.60 à 6.70   2.00 113 1.60 89
ie c 060 070 t086 l o   m6 x 1.00   7   8.60  

8.00

  7.50   7.60 to 7.70   2.90 184 2.40 127
 

L Type : long with two locking rings

  Plastics Wood or Fibreboard
Stainless steel contact us
Brass
                          mecanical properties
                          LEXAN ABS
Reference   Thread M
(6H)
  L   Ø E   Ø A   Ø B   Well Ø
  Torque
Nm
Hold.Force
daN
Torque
Nm
Hold.Force
daN
ie l 030 080 t056 l 0   m3 x 0.50   8   5.60   5.00   4.50   4.60 à 4.70   0.70 173 < 0.60 103
ie l 030 095 t056 l 0   M3 X 0.50   9.5   5.60   5.00   4.50   4.60 à 4.70   0.80 196 0.65 122
ie l 040 080 t066 l 0   m4 x 0.70   8   6.60   6.00   5.40   5.50 à 5.60   1.30 160 0.90 117
ie l 040 095 t059 l 0   M4 x 0.70   9.5   6.60   6.00   5.40   5.50 à 5.60   1.40 166 1.10 139
ie l 050 090 t076 l 0   m5 x 0.80   9   7.60   7.00   6.50   6.60 à 6.70   2.00 234 1.90 180
ie l 060 090 t086 l 0   M6 x 1.00   9   8.60   8.00   7.50   7.60 à 7.70   3.10 310 2.90 196
ie l 080 100 t106 l o   m8 x 1.25   10   10.60  

10.00

  9.40   9.50 à 9.60   3.40 425 3.30 275
 

Code reading key

Sub Famillies

V Screw
S Moulded-in
E Expansion
P Pressed-in
U Ultrasonic

Screw Insert Type

1 non-split – 60° ext. thread, ISO metric pitch
2 with cutting slot – 60° ext. thread, fine pitch
7 flat-bottom thread, 3 cutting holes
9 with cutting slot for soft plastics and wood
H 45° thread with 160° bottom – reversible + internal hexagon

Material

L Brass CW 614N
A tempered steel blade
I stainless steel

Specifications

0 None
N Nickel plating