inserts

for plastics, light alloys and wood

IV 7 • Screw Insert type 7

  • Post-moulding installation
  • High holding force

Flat-bottom thread, 3 cutting holes

  Plastics Light alloys & metals
Case-hardened tempered steel
Stainless steel
Reference   L   Thread M
(6H)		   Ext. Thread   Well Ø plastics   Well Ø light alloys   Reference   L
iv 7 030 060 m50 a 0   6   M3 x 0.50   5 x 0.60   4.6 à 4.7   4.7 à 4.8   iv 7 030 040 m050 a 0   4
iv 7 035 080 m060 a 0   8   M3.5 x 0.60   6 x 0.80   5.5 to 5.6   5.6 à 5.7   iv 7 035 050 m060 to 0   5
iv 7 040 080 m065 a 0   8   M4 x 0.70   6.5 x 0.80   6.0 à 6.1   6.1 à 6.2   iv 7 040 060 m065 a 0   6
iv 7 050 100 m080 a 0   10   M5 x 0.80   8 x 1.00   7.4 à 7.6   7.6 à 7.7   iv 7 050 070 m080 a 0   7
iv 7 060 120 m100 a 0   12   M6 x 1.00   10 x 1.25   9.3 à 9.5   9.5 à 9.6   iv 7 060 080 m100 a 0   8
iv 7 080 140 m120 a 0   14   M8 x 1.25   12 x 1.50   11.1 to 11.3   11.3 à 11.5   iv 7 080 090 m120 a 0   9
iv 7 100 180 m140 a 0   18   M10 x 1.50   14 x 1.50   13.1 to 13.3   13.3 to 13.5   iv 7 100 100 m140 a 0   10
iv 7 120 220 m160 a 0   22   M12 1.75   16 x 1.75   15.0 to 15.2   15.2 to 15.4   iv 7 120 120 m160 a 0   12

Code reading key

Code reading key
Sub Famillies

V Screw
S Moulded-in
E Expansion
P Pressed-in
U Ultrasonic

Screw Insert Type

1 non-split – 60° ext. thread, ISO metric pitch
2 with cutting slot – 60° ext. thread, fine pitch
7 flat-bottom thread, 3 cutting holes
9 with cutting slot for soft plastics and wood
H 45° thread with 160° bottom – reversible + internal hexagon

Material

L Brass CW 614N
A tempered steel blade
I stainless steel

Specifications

0 None
N Nickel plating