Insert plastic and light alloy fixing solutions
Headed pressed-in insert for pressing into thermoplastics and thermosets.
Advantages |
---|
▸ 45° knurl reduces radial loads during installation |
▸ Thinner boss walls |
▸ Pilot point to facilitate positioning |
Part Number | Thread M (6H) | L (mm) | Ø E (mm) | Ø B (mm) | Ø C (mm) | H (mm) | Well Ø (mm) | Recommended min. wall thickness (mm) | 3D |
---|---|---|---|---|---|---|---|---|---|
IP 2 030 059 R055 L 0 | M3 X 0.50 | 5.9 | 4.2 | 3.7 | 5.5 | 0.58 | 3.8 | 2.5 | |
IP 2 040 083 R071 L 0 | M4 x 0.70 | 8.3 | 5.8 | 5.3 | 7.1 | 0.89 | 5.4 | 2.5 | |
IP 2 050 094 R079 L 0 | M5 X 0.80 | 9.4 | 6.6 | 6.1 | 7.9 | 1.07 | 6.2 | 2.7 | |
IP 2 060 105 R095 L 0 | M6 x 1.00 | 10.5 | 8.2 | 7.7 | 9.5 | 1.32 | 7.8 | 3 | |
IP 2 080 105 R111 L 0 | M8 X 1.25 | 10.5 | 9.7 | 9.3 | 11.1 | 1.32 | 9.4 | 3.4 |
Quote & Information