inserts

for plastics, light alloys and wood

IV 2 • Screw Insert type 2

  • Post-moulding installation
  • High holding force

Cutting slot, 60° external thread, fine pitch

  Plastics Light alloys & metals
Casse-hardened tempered steel
Stainless steel contact us
Brass
Reference   L   ThreadM
(6H)		   Ext. Thread   Well Ø
iv 2 020 060 m045 l0   6   M2 x 0.40   4.5 x 0.50   4.1 to 4.2
iv 2 025 060 m045 l0   6   M2.5 x 0.45   4.5 x 0.50   4.1 to 4.2
iv 2 030 060 m050 lo   6   M3 x 0.50   5 x 0.50   4.6 to 4.7
iv 2 035 080 m060 l0   8   M3.5 x 0.60   6 x 0.75   5.5 à 5.6
iv 2 040 080 m065 l0   8   M4 x 0.70   6.5 x 0.75   6.0 to 6.1
iv 2 050 100 m080 l0   10   M5 x 0.80   8 x 1.00   7.3 to 7.5
iv 2 060 120 m090 l0   12   M6 x 1.00   9 x 1.00   8.3 to 8.5
iv 2 060 140 m100 l0   14   M6 x 1.00   10 x 1.50   8.9 to 9.2
iv 2 080 150 m120 l0   15   M8 x 1.25   12 x 1.50   10.9 to 11.2
iv 2 100 180 m140 l0   18   M10 x 1.50   14 x 1.50   12.9 to 13.2
iv 2 120 220 m160 l0   22   M12 x 1.75   16 x 1.50   10.8 to 11.4
iv 2 140 240 m180 l0   24   M14 x 2.00   18 x 1.50   16.9 to 17.2
iv 2 160 220 m200 l0   22   M16 x 2.00   20 x 1.50   18.9 to 19.2

Code reading key

Code reading key
Sub Famillies

V Screw
S Moulded-in
E Expansion
P Pressed-in
U Ultrasonic

Screw Insert Type

1 non-split – 60° ext. thread, ISO metric pitch
2 with cutting slot – 60° ext. thread, fine pitch
7 flat-bottom thread, 3 cutting holes
9 with cutting slot for soft plastics and wood
H 45° thread with 160° bottom – reversible + internal hexagon

Material

L Brass CW 614N
A tempered steel blade
I stainless steel

Specifications

0 None
N Nickel plating