SECAM has been supporting you for over 50 years in the design and industrialisation of inserts for plastics, light alloys and wood, with more than 300 references available from stock.
Headless
45° cross knurl increases torque resistance and holding force
Clean and fast ultrasonic or heat-transfer installation
- Clean and fast ultrasonic or heat-transfer installation
- 45° cross knurl increases torque resistance and holding force
- Headless
Técnica de fijación – Grandes series – E-Shop
Div 5
Div 3
Div 6
Div 4
Div 1
Div 2
Image technique 1
Image technique 2
| Part Number | Thread M (6H) | L | Ø E | Ø B | Well Ø | Recommended min. wall thickness (mm) | Technical sheet | 3D |
|---|---|---|---|---|---|---|---|---|
| IU 1 020 040 M036 L 0 | M2 X 0.40 | 4 | 3.6 | 3.1 | 3.2 | 2 |  | |
| IU 1 025 040 M046 L 0 | M2.5 x 0.45 | 4 | 4.6 | 3.9 | 4.0 | 2.3 | | |
| IU 1 025 057 M046 L 0 | M2.5 X 0.45 | 5.7 | 4.6 | 3.9 | 4.0 | 2.3 | | |
| IU 1 030 040 M046 L 0 | M3 x 0.50 | 4 | 4.6 | 3.9 | 4.0 | 2.3 | | |
| IU 1 030 057 M046 L 0 | M3 X 0.50 | 5.7 | 4.6 | 3.9 | 4.0 | 2.3 | | |
| IU 1 035 071 M054 L 0 | M3.5 x 0.60 | 7.1 | 5.4 | 4.7 | 4.8 | 2.5 | | |
| IU 1 040 040 M063 L 0 | M4 X 0.70 | 4.0 | 6.3 | 5.5 | 5.6 | 2.5 | | |
| IU 1 040 072 M063 L 0 | M4 x 0.70 | 7.2 | 6.3 | 5.5 | 5.6 | 2.5 | | |
| IU 1 040 081 M063 L 0 | M4 X 0.70 | 8.1 | 6.3 | 5.5 | 5.6 | 2.5 | | |
| IU 1 050 082 M071 L 0 | M5 x 0.80 | 8.2 | 7.1 | 6.3 | 6.4 | 2.7 | | |
| IU 1 050 095 M071 L 0 | M5 X 0.80 | 9.5 | 7.1 | 6.3 | 6.4 | 2.7 | | |
| IU 1 060 095 M087 L 0 | M6 x 1.00 | 9.5 | 8.7 | 7.9 | 8.0 | 3 | | |
| IU 1 060 127 M087 L 0 | M6 X 1.00 | 12.7 | 8.7 | 7.9 | 8.0 | 3 | | |
| IU 1 080 095 M102 L 0 | M8 x 1.25 | 9.5 | 10.2 | 9.5 | 9.6 | 3.5 | | |
| IU 1 080 127 M102 L 0 | M8 X 1.25 | 12.7 | 10.2 | 9.5 | 9.6 | 3.5 | | |
| IU 1 100 127 M125 L 0 | M10 x1.50 | 12.7 | 12.5 | 11.8 | 11.9 | 4 | |
Ultrasonic Insert – Type 1: unheaded
Phase
01
The insert is forced into a moulded hole under the action of ultrasound.
Phase
02
Ultrasonic insertion causes localised melting of the plastic which flows into the specific profile of the insert.
Product |
Sub-family |
Type |
Thread |
L |
Outer Shape |
Ø C |
Materials |
Specification |
|||||||
Example |
I |
U |
U |
0 |
2 |
0 |
0 |
4 |
0 |
M |
0 |
3 |
6 |
L |
0 |
|
Insert |
Pressed-in |
Ultrasonic |
Internal thread |
Total length 4 mm |
Knurl |
Largest diameter 3.6 mm (1/10mm) |
Brass CW 614N |
None |
|||||||
| Sub-families U Ultrasonic V Screw S Moulded-in E Expansion P Pressed-in |
Heat / Ultrasonic insert type Outer shape |
Materials |
Specifications 0 none 1 ZnNi Zinc Nickel N Nickelage |
