Insert plastic and light alloy fixing solutions
Expansion Insert, short with one locking ring
| Advantages |
|---|
| ▸ Straightforward and quick manual installation |
| ▸ Very sharp teeth for improved penetration of material |
| ▸ Low cost |
| ▸ Locking improves torque resistance and holding force |
| Part Number | Thread M (6H) | L (mm) | Ø E (mm) | Ø A (mm) | Ø B (mm) | Well Ø | 3D |
|---|---|---|---|---|---|---|---|
| IE C 020 035 T039 L 0 | M2 X 0.40 | 3.5 | 3.9 | 3.5 | 3.1 | 3.10 | |
| IE C 025 040 T044 L 0 | M2.5 X 0.45 | 4 | 4.4 | 4 | 3.5 | 3.60 - 3.70 | |
| IE C 030 050 T056 L 0 | M3 X 0.50 | 5 | 5.6 | 5 | 4.5 | 4.60 - 4.70 | |
| IE C 035 050 T059 L 0 | M3.5 x 0.60 | 5 | 5.9 | 5.5 | 4.9 | 5.00 - 5.20 | |
| IE C 040 050 T066 L 0 | M4 X 0.70 | 5 | 6.6 | 6 | 5.4 | 5.50 - 5.70 | |
| IE C 050 060 T076 L 0 | M5 x 0.80 | 6 | 7.6 | 7 | 6.5 | 6.60 - 6.70 | |
| IE C 060 070 T086 L 0 | M6 X 1.00 | 7 | 8.6 | 8 | 7.5 | 7.60 - 7.70 |
The insert is placed in a cavity which is either drilled or moulded in: the well.
The insert is forced into the well by axial pressure, deforming slightly in the process. The insert will be flush with the material to avoid possible removal due to lever effect.
As the screw goes in, the insert returns to its original shape, the locking pyramids are forced into the material, providing holding force and torque resistance. Select a screw long enough to effectively force the locking pyramids into the material. The screw must never come into contact with the bottom of the well.
Quote & Information
